The product

4 black ultrasonic sensors for the rear of the vehicle. Connect the box to the reversing bulb, the radar will engage at the same time as you engage reverse gear, a beep confirms the activation.

The drilling bell is provided, you drill then push the sensors into the bumper. You connect the whole, the reversing detector is functional.

The screen is wirelessly connected to the ultrasonic sensors. The screen can only be connected to a 12V source, so there are no wires to pass from the rear to the front of the vehicle. (the 12V source can be taken behind the car radio, for example)

Distance display from 2.00m to 0.3m. High sensitivity 22mm diameter sensors.

• 4 quality ultrasonic sensors
• Easy to install (20 minutes)
• Powerful buzzer
• Improved management box
• Bright color VFD display left and right side + distance in meters.

Use Case

• With any 12Volts vehicle

Contents

• 1 Box
• 1 manual
• 1 VFD Illuminated Display
• 1 Sensor controller
• 1 Buzzer integrated into the VFD display
• 4 ultrasonic sensors