The product

MTech brand. 4 black ultrasonic sensors for front or rear of the vehicle. Connect the box to the reversing bulb, the radar will turn on at the same time as you engage reverse gear, a beep confirms it has been activated.

The drilling bell is provided, you drill then push the sensors into the bumper. You connect the whole, the reversing detector is functional.

Distance display from 2.00m to 0.3m. High sensitivity 21.5mm diameter sensors.

• 4 quality ultrasonic sensors
• Easy to install (20 minutes)
• Powerful buzzer with digital display
• Improved management box
• Bright LED display on the left and right side + distance in extra flat meters.
• Screen dimensions: 12 x 2,8 x 1 cm
• Diameter of the sensors: 21,5 mm
• Power supply: 12V DC
• Consumption: <4W
• Ultrasonic frequency: 40 kHz
• Distance detection and display: 3,0 ma 0,3 m
• Measurement error: +/- 5 cm
• Operating temperature: -30 C to +70 C
• Maximum permissible bumper slope: + / - 5 

Use Case

• With any 12Volts vehicle

Contents

• 1 Box
• 1 manual in french
• 1 LED digital display
• 1 Sensor controller
• 1 Buzzer integrated into the display
• 1 Hole saw
• 4 ultrasonic sensors