🚗 THE PRODUCT

DRL module / automatic controller for APPROVAL and daytime running light management! This easy-to-install box allows you to reduce the intensity of the daytime running lights when activating the dipped headlights.

📦 CONTENTS

• 🔌 Simplified connection to daytime running lights (+ wire and - wire).
• 💡 The ideal module for our flexible LED-SIDE daytime running light strips or daytime running lights without modules.
• 🛠️ Easy installation, very small module.
• ✅ Daytime running lights approval.
• 📜 Complies with European legislation.

🎯 USE

• 🌟 With daytime running lights or others at your convenience.
• 🟡 2 Yellow cables: +12VDC flashers (optional) - turns the DRLs off and on again.
• ⚪ White cable: +12VDC low beam (optional) - decreases the intensity of the DRLs as soon as this cable is powered.
• 🔵 Blue cable: +12VDC after ignition (this cable is used to tell the relay to turn on the daytime running lights), once it is no longer powered, the daytime running lights stay on for 20 seconds.
• 🟢 Green cable: +12VDC activates the strobe mode as for an ambulance (optional).
• ⚫ Black cable: Battery ground.
• 🔴 Red cable: +12VDC battery.

🛒 CONTENT

•  Module with sufficiently long wiring (approximately 2.5 meters).